Tec 40Tec 40

IDEAL USES

  • Camping
  • Dive
  • Paddling
  • Running
  • Work

SHOP

Buy Now Shopatron

Shop Local Dealers

Shop Online Deals

You need flash player installed to view this content

COLORS

  • BLACKBLACK
  • BLUEBLUE
  • REDRED
  • YELLOWYELLOW

SPECIFICATIONS

POWER28 Lumens
LAMPHALOGEN BULB
BURN TIME5 Hours
BATTERIES4 AA Alkaline
WEIGHT181 Grams

TEC 40

The halogen bulb version of our Impact XL provides superior light-output-to-weight ratio. With the same ruggedness and rubber overmold as the Impact XL, the halogen bulb provides a warmer light underwater. This light is great for backup, or as a primary daytime light, as the warm light is phenomenal for restoring lost colors on the reef. With a classic dive light look and feel, the twist-activated switch prevents accidental on/off.

  • 4-AA
  • FOCUSED NARROW BEAMS
  • HALOGEN BULBS
  • Lumen 28
  • UL CERTIFICATION
  • WATERPROOF - LEVEL 3
  • Weight - 181

4-AA

4 AA Alkaline

FOCUSED NARROW BEAMS

This pattern creates a long, powerful beam of light excellent for illuminating distant areas. The resulting long-throw spotlight is especially well-suited for night hiking and search and rescue.

 

 

 

HALOGEN BULBS

HALOGEN BULBS work in exactly the same way as traditional incandescent bulbs found in your home with one major difference: they contain halogen gas instead of nitrogen or argon. This difference allows the bulb to burn brighter, more efficiently, and for longer periods of time. The bulb needs to be replaced less frequently since filament life is extended.

Lumen 28

The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.

 

UL CERTIFICATION

Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I – Division II – Groups A, B, C, & D or Class II - Division II – Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I – Division II – Groups A,B,C,& D will be noted with one (+) Class II – Division II – approved for Groups F, & G, will be noted with two (++).

WATERPROOF - LEVEL 3

The highest of Princeton Tec’s ratings, Level 3 is assigned to lights that offer a degree of water protection equivalent to IPX8 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 3 provide waterproof integrity for continual submersion in water at depths down to 100 meters.

Weight - 181

Princeton Tec’s advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products.